RVGeek

RV & Truck Electronics best prices

The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China, Vistit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

Product Features

  • Maximum power (Pmax): 100W
  • Voltage at Pmax (Vmp):17.2V
  • Current at Pmax (Imp): 5.82A
  • Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

Dimension 57.87inch×26.57inch×1.38inch / 1470mm x 675mm x 35mm Weight:12.1kg / 26.68bs The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China/Vietnam, Visit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

Product Features

  • Maximum power (Pmax): 175W
  • Voltage at Pmax (Vmp):19.06V
  • Current at Pmax (Imp): 9.18A
  • Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

TOPMYS TM-ES604 CB Radio Speaker 8ohm 5W Extenal Speaker for CB Radio or Ham Radio With 1.85m cable 3.5mm Mono Plug With below specification:
Impedance : 8ohm or 4ohm(default)
Power output:5-7W
Speaker: 7.62mm
Cable:Black with 1.83 mm length
Working Temperature: -20 – + 80 degrees
Storage Temperature -40 – + 85 degree
Humidity: < 90%, not frozen
Size:130x65x57mm
What is in the package?
1* CB Speaker
1* White Box
2*Installation Screws

Product Features

  • CB SPEAKER for CB Radio use maninly Intensify your CB Radio’s sound
  • 5 Watts & 8 Ohm Operating Power
  • With 3.5 Mono Plug could plug in all the CB Radio with 3.5mm interface
  • The Cable is as long as 1.85m which make your CB Radio could connect with it so far
  • The durable metal mesh grill make the speaker solid and long life CE, ROHS Standard

Get More Detailed Information About This Product…

– BRAND NEW **KICKER VX124** ” 300 WATT Car Subwoofer Enclosure – 300 Watt MAX – 150 Watt RMS – 4 Ohm Final Impedance – Frequency response: 27-500 Hz – Sensitivity: 88.3 dB – Injection Molded SoloKon Cone – Tinsel Leads Woven Into The Spider with Kicker’s Spiralead Technology – Double Stitched Surround for Enhanced Durability – Single High-Temp. Voice Coil – Optimized Polyfoam Ribbed Surround – World’s best bass value, and ready to drop in a trunk – Ready-made, outrageous KICKER bass – Easy-to-use impedance designated at the terminal cup assembly – Injection-molded, polypropylene cone with bracing eliminates distortion – Tough KICKER wood enclosure – Dense gray carpeting – Monogrammed, carbon-fiber front baffle – Enclosure Dimensions: 11-1/4″TD x 14-5/8″BD x 17-11/16″W x 16-1/8″H – Includes BOSS R1100M 1100W Mono Car Audio Amplifier + 8 Gauge Amp Wiring Kit

Product Features

  • KICKER VX124 ” 300 WATT Car Subwoofer + Enclosure
  • 150 Watt RMS, 4 Ohm Final Impedance
  • BOSS R1100M 1100W Mono Car Audio Amplifier
  • RMS Power: 250 Watt x 1 Channel @ 4 Ohm
  • 8 Gauge Amp Wiring Kit

Click Here For More Pictures And Product Details

– BRAND NEW PYRAMID Dual 12” 1200 Watt Bandpass System w/Neon Accent Lighting
– Built-In Neon Accent Lighting
– Two 12” High Power 4 Ohm Sub-Woofers
– Silver Polypropylene Cone
– Specially Treated Black Rubber Edge Suspension
– 2” High Temperature Aluminum Voice Coil
– Bandpass Alignment For Extra Deep Bass
– Plexi-Glass Front Window
– 4 Tuned Ports
– 1200 Watts Peak Power
– Frequency Response: 35Hz-1K Hz
– Dimensions: 16”D x 31.5”W x 15.5”H

– NEW **BOSS R1100M** 1100W Mono Car Audio Amplifier
– 1100 Watt Max
– Max Power: 1100 Watt x 1 Channel @ 2 Ohm
– RMS Power: 250 Watt x 1 Channel @ 4 Ohm
– Boss Illuminated Logo
– Class A/B
– 2 Ohm Stable
– MOSFET Power
– Line Output
– List item
– Low Pass Crossover
– Signal to Noise Ratio: >102 dB
– THD: 0.01%
– Dimensions: 10-7/16″ (W) x 2-1/4″ (H) x 9-1/8″ (L)
– Remote Bass Control Included!

– Soundstorm AKS8 Complete 8 Gauge Amplifier Installation Kit

Product Features

  • PYRAMID Dual 12” 1200 Watt Bandpass System w/Neon Accent Lighting
  • Built-In Neon Accent Lighting, Bandpass Alignment For Extra Deep Bass, 1200 Watts Peak Power
  • BOSS R1100M 1100W Mono Car Audio Amplifier + BOSS 8 Gauge Amp Wiring Kit
  • Max Power: 1100 Watt x 1 Channel @ 2 Ohm, RMS Power: 250 Watt x 1 Channel @ 4 Ohm
  • Subwoofer Box Dimensions: 16”D x 31.5”W x 15.5”H

Click Here For More Pictures And Product Details

Boss AR1500M ARMOR 1,500-Watt Mono Mosfet Amplifier

View larger
Platinum Online Dealer Warranty

6 year BOSS Audio Platinum Online Dealer Warranty when purchased from Amazon. com

Class A/B Topology

A class A/B amplifier uses two groups of transistors and it is generally considered to be the best compromise of the two classes put together. A pure class ‘A’ amplifier typically has an enormous amount of current flowing through its output transistors with no audio signal. A pure class ‘B’ amplifier has no current flowing through its outputs with no audio signal. This eliminates virtually all of the crossover distortion that’s possible with class ‘B’ amplifiers. A class A/B amplifier is much more efficient than a class ‘A’ but without the possible distortion of a class ‘B’.

MOSFET Power Supply

Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals in our computers, our telephones, game consoles, cars, electrical appliances, and in this case, our amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. An electrical switch has two possible states, on or off. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.

Low And High Level Inputs
View larger
Low And High Level Inputs

You can get a signal into Armor series amplifiers two different ways – Low level and High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measure in wattages. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Note: Do not connect both the high level and low level inputs from your receiver to your amplifier at the same time.

General Features

• 2 Ohm Stable Operation with Output Power Increase • Thermal and Speaker Short Protection • Soft Turn-On Circuit • Remote Turn On / Turn Off Circuit • Gunmetal Gray Anodized Heatsink

Variable Crossover
View larger
Variable Crossover

Subwoofers reproduce sound based low range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our AR1500M amplifier, a variable crossover is offered so that you, the listener, can have the ability to set the frequency at which the crossover occurs, thereby setting precise sound specifications on your subwoofer.

Nickel Plated RCA Low Level and High Level Inputs
View larger
Nickel Plated RCA Low Level And High Level Inputs

Bass Boost
View larger
Bass Boost

Set this dial to your liking and your subwoofers will get that extra kick in the pants that they are looking for, called Bass.

Fuses, Speaker, and Power Connections
View larger
Fuses, Speaker, And Power Connections

Product Features

  • MOSFET Monoblock Power Amplifier
  • Remote Subwoofer Level Control Included
  • 1500 W x 1 Max Power,700W x 1 RMS Power
  • > 105 dB Signal-To-Noise Ratio
  • Special Shipping Information: This item cannot be returned to Amazon.com. For additional information concerning this policy, please visit our Product Specific Returns Policy Page

Click Here For More Pictures And Product Details