RVGeek

RV & Truck Electronics best prices

The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China/Vietnam, Vistit us at www.Newpowa.com for more details.

Product Features

  • Maximum power (Pmax): 30W
  • Voltage at Pmax (Vmp):17.20V
  • Current at Pmax (Imp): 1.74A
  • Pre-attached 3ft Wire with Bare Ends. Mounting Holes Ready(Mounts for Purchase Separately)
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

100 Watt 12 Volt Polycrystalline Solar Panel

Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance, Withstand high winds (2400 Pa) and snow loads (5400 Pa). IP65 rated junction box provides complete protection against environmental particles and low pressure water jets.

High Quality

High module conversion efficiency. Ideal output: 500Wh per day (depending on the availability of sunlight). Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.

Reliability

The RICH SOLAR 100 Watt 12 Volt Polycrystalline Solar Panel is a key component in establishing an off-grid solar energy system. Weighing in at only 16.5lbs, this panel contains 36 efficient polycrystalline solar cells protected by a thin layer of tempered glass. 

The panel is designed to withstand heavy snow and wind loads. The back of the panel features a waterproof junction box and MC4 leads for easy plug and play use! Use this panel alone or add additional panels to create a custom solar energy system. 

Easy Installation

Off-Grid Rooftop/Ground Mounted. 

Residential/Rural.

Pre-drilled holes on the back of the panel for fast mounting and securing.

RVs, trailers, motorhomes, caravans, boats, etc.

12 volt Battery Charging.

Specifications  

Maximum Power: 100W

Maximum System Voltage: 1000V DC (UL)

Optimum Operating Voltage (Vmp): 17.8V

Open-Circuit Voltage (Voc): 21.2V

Optimum Operating Current (Imp): 5.62A

Short-Circuit Current (Isc): 6.02A

Weight: 16.5 lbs

Dimensions: 39.6 x 26.6 x 1.4 inches

Product Features

  • High module conversion efficiency. Ideal output: 500Wh per day (depending on the availability of sunlight). Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.
  • Off-grid fully self powered systems as RV solar panels, Boat solar panels, and Marines solar panels
  • Withstand high wind (2400Pa) and snow loads (5400Pa); resistant aluminum frame which allows the panels last for a long time
  • 12 Volts battery use
  • 25-year transferable power output warranty; 5-year material and workmanship warranty

Get More Detailed Information About This Product…

The Renogy Eclipse 100 Watt 12 Volt Monocrystalline Solar Panel combines power and appeal into one sleek package. The Eclipse is made of the highest efficiency cells Renogy has to offer while weighing a mere 15 pounds and standing a half-foot shorter in height than standard Renogy panels. Another feature that makes this panel stand out is its black corrosion-resistant aluminum frame. No matter where the road takes you, this Eclipse 100 Watt Monocrystalline Solar Panel will make a great addition to any outdoor adventure.

Specifications
Maximum Power: 100W
Optimum Operating Voltage (Vmp): 17.7V
Optimum Operating Current (Imp): 5.70A
Maximum System Voltage: 600V DC (UL)
Open-Circuit Voltage (Voc): 21.2V
Short-Circuit Current (Isc): 6.10A
Dimensions: 40.9 x 21.0 x 1.4 inches
Weight: 15 lbs

Product Features

  • 【More Efficient】 Monocrystalline panels come with high-efficiency cells that help increase module efficiency. Module efficiency: Eclipse 100W Monocrystalline:22%, regular 100W Monocrystalline: 21% , 100W Polycrystalline: 18.7%. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.
  • 【Improved Look】No grid lines on front of solar cells allow for a more clean look. New black frame compliments high-efficiency solar cells.
  • 【Reliable】Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life. EL tested solar modules; no hot-spot heating guaranteed. TPT back sheet ensures smooth performance over a long period of time.
  • 【Durable】Guaranteed positive output tolerance (0-3%); withstands high winds (2400Pa) and snow loads (5400Pa).Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. IP65 rated junction box provides complete protection against environmental particles and low pressure water jets.
  • 【Versatile】Can be used for many different applications. Ground mount compatible. Compatible with on-grid and off-grid inverters. Pre-drilled holes on the back of the panel allow for fast mounting and securing. Pre-drilled holes included for grounding. Compatible with different Renogy mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts.

Get More Detailed Information About This Product…

The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China/Mexico/Vietnam depend on the batches. Vistit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

Product Features

  • Maximum power (Pmax): 100W
  • Voltage at Pmax (Vmp):17.2V
  • Current at Pmax (Imp): 5.81A
  • Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

Renogy 100W 12V Polycrystalline Solar Panel is a great place to start to your off-grid system. These sleek and durable panels are perfect for keeping your electronics functioning while traveling. For solar enthusiasts new and old the Renogy 100W 12V Polycrystalline Panel is the right choice for you! The Renogy 100W Polycrystalline Solar Panel has several uses including marine, dry camp, and other off-grid applications.

Specifications
Maximum Power: 100W
Optimum Operating Voltage (Vmp): 17.8V
Optimum Operating Current (Imp): 5.62A
Maximum System Voltage: 600V DC (UL)
Open-Circuit Voltage (Voc): 22.4V
Short-Circuit Current (Isc): 5.92A
Dimensions: 39.7 x 26.7 x 1.4 inches
Weight: 16.5 lbs

Product Features

  • 【Reliable】Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life. EL tested solar modules; no hot-spot heating guaranteed. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. TPT back sheet ensures smooth performance over a long period of time.
  • 【Durable】Guaranteed positive output tolerance (0-3%); withstands high winds (2400Pa) and snow loads (5400Pa). Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. IP65 rated junction box provides complete protection against environmental particles and low pressure water jets.
  • 【Versatile】Can be used for many different applications. Ground mount compatible. Compatible with on-grid and off-grid inverters.
  • 【Installation Ready】Pre-drilled holes on the back of the panel allow for fast mounting and securing. Pre-drilled holes included for grounding. Compatible with different Renogy mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts.
  • 【Warranty Information】25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate.

Get More Detailed Information About This Product…

The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China, Vistit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

Product Features

  • Maximum power (Pmax): 100W
  • Voltage at Pmax (Vmp):17.2V
  • Current at Pmax (Imp): 5.82A
  • Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

Dimension 57.87inch×26.57inch×1.38inch / 1470mm x 675mm x 35mm Weight:12.1kg / 26.68bs The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China/Vietnam, Visit us at www.Newpowa.com for more details. **For panels 50w and above, we only ship to 48 lower states unless additional postage paid**

Product Features

  • Maximum power (Pmax): 175W
  • Voltage at Pmax (Vmp):19.06V
  • Current at Pmax (Imp): 9.18A
  • Diodes are pre-installed in junction box, with a pair of pre-attached 3ft MC4 Cable
  • 25-year transferable power output warranty

Get More Detailed Information About This Product…

WINGONEER® trademark Reg.NO:4747611

Using Doppler radar technology, this is a microwave sensor module specifically for detecting moving objects and human body. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage. Widely used in human body sensing lighting system, anti-theft alarm system.

Features:
– Working voltage: 4-28VDC
– Operating current: less than 3 mA
– Output voltage: 3.3V (from 3V3 pin)
– Output Current: 100mA maximum
– Detecting range: less than 120 degrees taper angle within 7 meters
– Trigger mode: repeat trigger
– Delay time: 2 seconds (the default value), by soldering capacitor in different capacities on C-TM pads to adjust it
– Active Level: high (when it detects a moving object)
– Output Interface: 3V3 (3.3V power supply output), GND (power ground), OUT (output signal), VIN (power input), CDS (detection can be turned off during the day by soldering an external photoresistor to ground). Only need to use GND / OUT / VIN in general applications.
– Application: Automatic lighting, smart home, DIY projects

Packing List:
5x Microwave Radar Motion Sensor Module

Product Features

  • Using Doppler radar technology, this is a microwave sensor module specifically for detecting moving objects and human body.
  • The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage.
  • Widely used in human body sensing lighting system, anti-theft alarm system.
  • Transmission signal processing control chip RCWL-9196, wide operating voltage range: 4.0-28.0V.
  • Compared with the traditional infrared feeling PIR, with the penetrating detection capability

Get More Detailed Information About This Product…

Features:

Ultra small volume: the front lens with ultra wide angle of 140 degree can be rotated up and down 20 degrees. The back lens is with ultra wide angle of 120 degrees high resolution. This perfect modular design is more convenient for various angle and high resolution video shooting
Built-in 1/4 inch low noise and high quality photographic element can capture ultra clear picture in a dark place
Built-in lithium battery with charging and meanwhile recording function
Built-in microphone/speaker
Support TF card up to 32G (TF card is not included)
Automatically turning on and recording when the vehicle start
With a delayed start function to prevent transient pulse current damage machine at the moment the vehicle start
GPS scanning and positioning
Gravity induced sensor
Note: The camera is not including TF card, thanks!

Description:

Front Lens: Ultra wide angle of 140 degrees
Back Lens: Ultra wide angle of 120 degrees
Photosensitive Element: CMOS
2.7″ TFT LCD Screen
Resolution Ratio: 1280×480
Television Output: NTSC/PAL
GPS Module: Support
DC Access: DC 5V
Battery: Built-in Lithium Polymer Battery
System Requirment: Windows 2000/XP/VISTA/Win 7
Please Note: Not compatible with any Mac system.
Optional Language: English/Russian/Chinese/Japanese/Korean

Package includes:

1x Car DVR
1x Car Charger
1x GPS module
1x Vehicle Mount
1x Clip
1x User Manual

Product Features

  • Dual cameras, bringing convenience for you to take video at front and back at the same time.
  • Newly added GPS module can record the whole driving track. Using random specialized software, you can see the video at computer, at the same time connect google map through the internet, driving track shows on the map and you can trace the running route of the vehicle.
  • Built-in gravity sensor G-sensor can record the gravity sensing information. Using random specialized software, you can see the video at computer, at the same time read the gravity sensing data to trace accident and abnormal circumstance occurred in the running process.
  • Loop recording per 119MB and cover the earlier segment automatically when the TF card (not including) is full, and because of its own proprietary software, you just can see the capacity of your TF Card is 119MB on computer, even if you have formatted your card. In fact, it does use the full capacity and format the card successfully, so pls don’t worry about this.
  • Built-in lithium battery with charging and meanwhile recording function.

For More Information – Click Here

Product Features

  • Auto Driving Buddy Dual Camera Portable Car Digital Video Recorder
  • Removable Memory MicroSD required. 3MegaPixel SnapShot and 720P Video HD.
  • Built-in LCD Screen Montior, Cigarette charger, Model F20
  • By SecurityCameraDirect

Click Here For More Information

This is a Mini OSD System specially designed for use with small electric powered models. Its light weight and compact design makes it ideal for use on micro planes or any other model where saving weight is crucial.
This GPS OSD system enables you to view vital data real-time while flying your FPV model. Things such as battery voltage, flight time, ground speed and GPS coordinates are all within view while using this system. This is a must have for you FPV model!
Features:
– GPS Coordinate Display
– Time Display
– Ground Speed Display
– Voltmeter
– Stopwatch
– RSSI Receiver Signal Strength Detection
– Programmable Display Content
– Supports NTSC and PAL TV Signal
– Supports Anti-Glare Shade Control Signal
– Supports Manual Calibration
Specs.
Weight: Main Board – 4.6g / GPS Module – 25g
Dimensions: Main Board – 34x4x20mm / GPS Module – 45x10x42mm
Working Voltage: Main Board – 7.4~12V / GPS Module – 5V
ID: 074000204

Product Features

  • Weight: Main Board – 4.6g / GPS Module – 25g
  • Dimensions: Main Board – 34x4x20mm / GPS Module – 45x10x42mm
  • Working Voltage: Main Board – 7.4~12V / GPS Module – 5V

For Detailed Information, Visit Our Website

Specifications:
Related power: 10W
Voc: 18.2V
Vop: 17.3V
Short circuit current (Isc): 0.54A
Working current (Iop): 0.57A
Output Tolerance: ±3%
Temperature range: -40℃~+80℃
SLA Battery Voltage: 12V
Dimensions: 14.96*8.66*0.1in (380*220*3mm)
Net Weight: 0.66lbs (0.3kg)

Package Included:
1pc 10W 12V Epoxy Solar Panel with 3 feet Cable & 1A Diode

Product Features

  • High efficiency solar cells. Can be used for trickle charger.
  • Light weight and easy to carry. DIY your camper backpack.
  • Nice looking by laminated PCB board with top PET sheet.
  • Diode for anti-reverse charging to battery.
  • 100% power output (The test conditions: 1Kw/m², 25℃, AM1.5).

Click Here to Get More Detailed Information About This Product…

The Graupner HoTT GPS/Vario Module is used to monitor real-time information such as the model’s altitude and location. All the data is displayed on the transmitter LCD screen for immediate feedback. The Graupner HoTT GPS Module is programmable through either the Graupner HoTT transmitter or Graupner HoTT Smart-box.

Product Features

  • Distance measurement, flight path storage, flight heading of model available through GPS sensor
  • Provides altitude monitoring via variometer sensor
  • Min/max altitude, descent/ascent rate
  • Warning alarms can be programmed and set to repeat every 30 seconds to five seconds

For Detailed Information, Visit Our Website