PAC SNI-35 Variable LOC Line Out Converter

Adjustable Line Output Converter

Product Features

  • Adjustable Line Output Converter
  • Use the SNI-35 when adding an amplifier to a factory radio to convert the radio’s speaker level output to the lower amplifier (RCA) level input
  • Utilize Audio Transformer for Noise Isolation
  • Phase Adjusted
  • .5 dB Linearity from 20 – 20,000 Hz
  • Adjustable Line Output Converter
  • Use the SNI-35 when adding an amplifier to a factory radio to convert the radio’s speaker level output to the lower amplifier (RCA) level input
  • Utilize Audio Transformer for Noise Isolation
  • Phase Adjusted
  • .5 dB Linearity from 20 – 20,000 Hz

Click Here For More Pictures And Product Details


Tagged , , , . Bookmark the permalink.

3 Responses to PAC SNI-35 Variable LOC Line Out Converter

  1. Markcm says:

    Perfect solution for adding aftermarket head unit in Audi with BOSE Audi cars with BOSE send a low level signal from the head unit to external amplifier(s), the problem when replacing the stock head unit with an aftermarket is that the voltage is not the same as most other traditional RCA low level signal from aftermarket Head Units such as Pioneer, Alpine, Sony… Which typically use about 4v RCA signals.I specifically replaced the factory RNS-E navigation with BOSE unit in my 2006 Audi A4 with a direct from China Android 4.4 navigation unit. It…

  2. Keenan Kern says:

    Worked Like a Charm Well, this little line converter was perfect for my project. I was installing a subwoofer and amplifier into my Blazer and I was still using the stock head unit. All I had to do was use wire taps to tap into the door speakers, then run speaker wire from the taps to the line converter, connect, crimp, and go. I didn’t have to ground it, either. Just 4 simple connections which were clearly labeled in the papers that came with it. I then just connected the RCA cables from my amplifier to the line…

  3. Farmer JJ says:

    Had one for 7 years and need another 0