This 7”TFT LCD monitor with Wireless Digital system camera is suitable for most truck, bus, trailer and other vehicles. Easy installation without extra confused long connecting cables which can save much more time.Instructions with diagrams are also included in the manual which comes with your package.
High resolution TFT-LCD monitor: 800*480
Screen size: 7 inch new TFT panel
Power supply: 12-24V DC
Camera(with built-in TX)
Image device：1/3 inch color SONY CCD
Resolution：480 TV lines
Minimum illumination：0Lux/(infrared LED on)
Night Vision range：More than 8M
Lens Angle：120 degrees
S/N ratio：more than 48db (AGC-OFF)
Paring the camera
1.The camera and receiver are automatically paired.There is no need to pair again unless you need to replace the receiver module or camera.
2.The pairing code is needed in the event of losing connection due to weak signal strength, but it is rare.
How to pair?
When the message “Please press pair key on TX side” appears on the receiver(RX screen )Press and hold the receiver(RX) Pair Code key for 1-3 seconds.
Within 30 seconds Press and Hold the transmitter(TX)Pair Code Button for 1-3 seconds. Pairing will then start.
Once pairing is complete”PAIR OK” will appear on the receiver(RX screen)
- 7″ TFT LCD Monitor with built-in speaker and remote control + Water-resistent Wireless Digital Heavy Duty Night Vision Rear View Camera with wireless transmission
- Two video inputs,one audio input and optional PAL&NTSC TV system. Monitor installation is easy to be done
- 18 IR lamps 1/3-inch color SONY CCD camera with 120 degrees lens angle and 8M night vision range gives you safer driving experience in the day/night.It supports normal and mirrored images
- Wireless digital portable receiver without any interference within 30m
- Suitable for most gigantic vehicles, such as Excavator, Cement Truck, Farm Tractor,Trailer&RV, Heavy Truck, School Bus