Author: RV & Trucking Team
- 【COMPATIBLE WITH ALL US AND CANADIAN CARRIERS】 HiBoost 10K Plus Pro cell phone signal booster is compatible with all US and Canadian carriers which include AT&T, T-Mobile, Verizon, Sprint, Straight Talk, U.S. Cellular, and many more. The cell booster amplifies 4G LTE, 3G and 2G cell phone signal for your home and office.
- 【HiBoost App helps fine tune max power】: Most cell phone booster has you pretty much working in the blind, no figures you can see but guess. HiBoost App helps fine tune max power and see real-time data of what the signal booster is doing, and let you squeeze every last power from the cell booster. Even 1dB more power is precious when you suffer from no signals. Further HiBoost APP online-support assures you get the absolute best possible set up and performance.
- 【END DROPPED CALLS, FASTER DATA SPEEDS】HiBoost signal booster improves your data speeds and stops dropped calls. Stronger cellular signal connection and higher speed apply to smartphone, tablet, data card, Wi-Fi Hotspots and notebooks all at the same time
- 【UP TO 12,000 SQ FT COVERAGE】HiBoost 10K Plus Pro cell phone booster provides two indoor antennas to double ensure your space 100% fully covered, one built-in antenna and secondary panel antenna. It covers up to 12,000 sq ft. The coverage may vary between 6,000~12,000 sq ft due to outdoor signal conditions. So it is crucially important to find out the best outdoor antenna position by HiBoost app or LCD display.
- 【ROCK SOLID QUALITY AND OUTSTANDING CUSTOMER SERVICE】 3 years warranty. All prime parts of Hiboost cell booster are built by rock solid hardware with commercial quality standards. The metal case ensures strong heat dissipation, you will not face overheat cause failure. HiBoost provides various US-based tech-support – online app chat & ticket, phone and email, so you can contact us anytime anywhere you need service.
Our mount has the metal clip that inserts into the radar detector, just like the one you received with your radar detector. Unlike the one you received with your radar detector, this mount has a single extra large suction cup that’s vacuum attached to your windshield or with the included dashboard disk, you can place this mount right on your dashboard. Also unlike the original suction cup mount, this one has an adjustment point so that you can change the angle of the device.
Our Mount is compatible with the following Radar Models : Escort and Beltronics radar detectors, including S55, New Passport, STi Magnum, STi Driver, GX65, GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895 & Express 795, Passport 9500ix, Passport 9500i, Passport 8500×50, Passport 8500, Solo S2, Solo S3, Solo RD-5110, Passport 7500S, Passport 7500, 6800, 5000, 4600, 4500, and 4200
Please note this mount is not compatible with MAX Series, Passport iQ, SmartRadar or REDLINE models
- Brand New in ChargerCity NO FUZZ NO MESS Packaging (PLEASE DO NOT ORDER IF YOUR MODEL IS NOT LISTED IN PRODUCT DETAIL, This mount is model specific)
- Unlike the one you received with your radar detector, this mount has a single extra large suction cup that’s vacuum attached to your windshield or Your Dashboard (using the provided dash disk)
- The mount has the metal clip that inserts into the radar detector with an adjustment point so that you can change the angle of the device
- Compatibility: S55, New Passport, STi Magnum, STi Driver, GX65, GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895 & Express 795, Passport 9500ix, Passport 9500i, Passport 8500×50, Passport 8500, Solo S2, Solo S3, RD-5110 Passport 7500S, Passport 7500, 6800, 5000, 4600, 4500, and 4200
- Compatible with Passport s75g, Passport X70, Passport S55, Beltronics Vector 995, RX65, Most Rocky Mountain Phantom-T. *** (NOT COMPATIBLE WITH Escort Max EX & NEW iX Series) ***
The 18 WX ST II is a 40 Channel CB radio with 10 Weather Channel reception and front-firing-speaker ideal for use recreational vehicles. Plus Dual-watch to monitor two channels simultaneously and all 40 channel scan in a sleek compact design.
- SoundTracker System – Cuts noise up to 90% for clearer communications
- NOAA Weather and Emergency Radio – Be prepared for storms and emergencies with built-in NOAA radio receiver
- Dual Watch – Monitor 2 channels simultaneously
- Instant channel 9/19 – Immediate access to emergency channel 9 or information channel 19
- Scan – Activates scan of all 40 channels
The EQS755 is 1/2-Din Chassis Graphic EQ w/ Built-In Low-Pass Filter. Equipped with a full-featured 7-band graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.
- 1/2-Din Chassis Graphic Equalizer with Built-In Low-Pass Filter
6-Channel / 8-Volt RCA Outputs (Front, Rear and Subwoofer)
7-Ban Graphic Equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz)
- 3.5mm Front AUX Input
2-Channel RCA AUX Input with Variable Gain Adjustment
RCA and High Level Speaker Inputs
- Blue Illumination
Independent Master Volume and Subwoofer Level Control with Fader Control
Selectable 12dB Low-Pass Filer (60Hz or 90Hz)
- Ground Loop Isolation Circuit
Wide dynamic range (WDR)–The camera automatically adapts by fine-tuning the exposure of the camera to create balanced images and footage in any light condition.
G-Sensor–The built-in G-sensor will automatically save and record the video when detecting an unexpected event. And the video can be taken as a proof in case of traffic problems.
Loop recording–Set loop recording time to 3 minutes,5 minutes,10 minutes,or off.The newest file will automatically overwrite the oldest one when the SD card is full.
Parking Monitoring–In Parking Mode,dash cam will only record video when motion or vibration is detected.The feature is helpful for vehicles that have an always-on accessory port or units that hardwired to power.
Taxi Dash Cam with Voice Recorded–Built in micphone and speaker to capture high quality audio clear without distortion.Don’t want to record voice?Just one press to turn the micphone off.
Camera image Sensor: Sony IMX323
View of angle: 170 degree wide angle(Front Lens),140 degree angle(In-Car Lens)
Maximum video resolution: FHD1080P(1920×1080P@30FPS)
Maximum resolution of photo:12M(4032×3024)
Language:English and multi-language
Screen Display:3.0 Inch
Power input:DC 5V/2A
1.The build-in battery is small capacity, please plug our original car charger while use it.
2.Please use high quality class 10 micro SD card, and best suggest 16Gb and 32Gb;please format SD card before using.
3.SD card is not included in the package.
4.Please contact with us freely if have any questions,we will reply and give you technical support within 24 hours.
- 【Full HD Recording】Leading novatek 96658 chipset, with sony exmor imx323 image sensor,captures Full HD 1080p video @30fps,offers clear and wide image even at night
- 【310 Degree Angle&360 Degree Rotating】170 degree high-resolution ultra wide-angle front lens and 140 degree in-car camera lens,in-car camera is 360 degree rotating,greatly recording simultaneously what is happening in the car and outside the car.Perfect dual lens dash cams for cars,cab driver,taxis,Uber and others
- 【Powerful Features】This 3 inch display dash camera is alloy shell,with all functions:G-Sensor,Loop Recording,WDR,Night Vision,Emergency Lock,Motion Detection,Parking Monitor,which bring you a safer driving experience
- 【Easy To Use】Simply suction cup or 3M adhesive sticker bracket mount it to windshield,connect the power cable,the dashboard camera will automatically on/off when engine ignition on/off.Perfect for new and experienced motorists
- 【Quality Control And Warranty】E-ACE is professional manufacturer of dash camera with CE,FCC,ROSH certifications,each dash camera has passed strict inspection.E-ACE provide 45 days money back guarantee and 12 months product warranty. 24hr customer service response time&technical support
PUMPKIN 10.1 inch Touch Screen Headrest DVD Player, for both car and home use, is a perfect car rear seat entertainment system, especially for long road trips or plane travel, provide audio visual enjoyment for back seat passengers, helps to keep your kids quiet and joyful during trip.
Screen size: 10.1 inch TFT screen
Resolution：1024*600*3RGB LED backlight
Audio output：VP-P2.8V，0DB = 1V 20HZ-20KHZ
THD：1% A weighting（speakers） 10%（headphones）
Working environment：temperature 5-40℃，humidity ＜90%
Net weight: 985g
Product size: 260*200*46mm
1* 10.1 inch DVD Player
1* Car Charger
1* Infrared Remote Control
1* AC adapter
1* Mounting Bracket
1* User Manual
- 【1080P Region Free Headrest DVD Player for Car】: Support Multi Region and 1920*1080@30fps HD video playback, compatible with MPEG/ MPG/ TS/ TRP/ VOB/ FLV/ RMVB/ MP4/ AVI/ MOV/ MKV/ ASF/ WMV formats. Built-in USB/SD card slot up to 128GB with FAT32 format.
- 【Multifunctional Car Headrest Monitor】: HDMI input function allows you to sync up to 1080P video from your computer, mobile phone, Raspberry Pi, Xbox or kindle fire etc.(It supports HDMI protocol below version 1.4.). Built-in FM and IR transmitters enable you to transmit audio to car stereos or wireless IR Headphones. With AV-IN/ AV-OUT function, 2 dvd players can play the same movies in DVD mode when you connect them together with AV cable.
- 【Car DVD Player with Front Clamshell and Bottom speakers Design】: The innovative flip design makes it much easier for kids to change discs with the player mounted. Bottom speakers design can reduce sound interference to the front passengers. 10.1 inch HD TFT display with 1024*600(*3RGB) pixels offers you crystal clear picture.
- 【Break-point Memory Function】: The Resume Play function allows you to continue playing your movie or video from where you left last time, even if power off or disc removed. No worries about repeat or skip. Time-saving enough.
- 【Easy Installation & Use】: Customized Adjustable mount holder holds the headrest monitor sturdy and firmly, allows you to adjust the screen angle freely for a better viewing angle and can be used on headrests in different sizes.
Beam Pole/Mast Mount Antenna f/GO!®Iridium Pole Mount Antenna RST710 is designed for Maritime and fixed site based applications. Designed to work with Iridium based devices.The antenna is omnidirectional and therefore makes it an easy installation in any location. The Antenna is supplied with both straight pole mounting or right angle brackets depending on the installation location. The antenna has a recessed TNC female connector to make the cable connection inside the antenna and protected from harsh environments.Features:Iridium approved Designed for harsh environments Small and lightweight Weatherable polymer Manufactured in the USA Specifications:Altitude: 20,000’Power Handling: 1WVSWR: < 2.0 : 1Impedance: 50 OHMSAxial Ratio: 3.0db Max at bore sightPolarization: Right Hand CircularFrequency: 1616 – 1626 MHzConnector: TNC FemaleExtreme rain exposure: 37 mm/10 min; 145mm/24 hExtreme snow exposure: 3,0kN/m2Wind: 35m/sOperating Temp: -40°C to +85°C / -40°F to 185°F
- Iridium Beam Pole/Mast Mount Antenna f/GO! [RST710]
- DISH Playmaker portable satellite antenna featuring a larger high-strength military grade aluminum alloy reflector for improved signal strength, optional RV roof mount and updated sleek design.
- Includes dish Wally HD receiver; single tuner dish receiver featuring RF remote with remote finder and built in apps (Netflix).
- Easy setup portable antenna; powered by single coax connection through dish receiver; easy to use and lightweight RV portable satellite dish.
- Compatible with all Winegard Carryout, Pathway and DISH Playmaker portable satellite antennas. Cross functional mount for maximum versatility.
- Adjustable Height and Level – Adjusts from 14.5″ to 22″. Quickly disassembles for compact storage.
- Built Tough – Built to withstand the harsh outdoor environments. Easy assembly with sturdy mount including ground anchor and bungee. 2 years parts, 1 year labor warranty.
Stop walking around to find a stronger signal! Never experience a dropped or missed call again. Ideal for your home or office. This device captures the cellular signal outside, enhances and rebroadcasts it indoors, so you can enjoy crystal-clear phone calls, while reducing dropped calls, and superfast data speeds. The booster lets you wirelessly connect over 25 mobile devices and works with 2G, 3G and 4G networks in US and Canada. Features: serves as an in-building solution Easy to set up with all hardware included boosts signal for all US and Canadian cell carriers supports multiple users automatic gain control ensures reliable coverage even with an intermittent incoming signal three Watts of radiated TX powered console display indicates signal levels and makes installation quick and easy benefits: improved inside cellular voice and data signal reliable cell signal and more consistent data speeds faster data downloads reduce Radiation and increase battery life, up to 2 hours additional talk time in weak-signal areas automatic oscillation control and network overload protection to maintain maximum gain at all times protects cell sites from harmful interference
- Works with all Carriers: AT&T, Verizon, T-Mobile, Sprint, U.S. Cellular, etc. Increase signal strength and communication speed across multiple devices (smart phones, tablets, modems, Wi-Fi hotspots) at the same time.
- Secondary antenna double coverage: unique secondary function, settle coverage problem in building caused by structure.
- Easy set up and quickly: little size on desk indoor unit, random change of placement. All of the components you need for installation are included in the package.
- Fcc approved: automatically adjusts system gain and power level to get the optimum result. No manual intervention needed. Easy setup. Complete installation can be done in half an hour by one person.
- Enhances the signal up to 5, 000X: boosts voice, text and data signals. Perfect cell phone signal Booster if you are located very far Away from the nearest cellular tower, or if your building materials obstruct a strong signal, I.E. Metal roofs on home, office, shop, pole building, warehouse, etc.. With a coverage area of 7, 500 sq ft and up. (Note: coverage area range depends on the outdoor signal level: 1-2 bars (-100dBm) ~1, 000 sq ft, 3-4 bars (-90dBm) ~4, 000 sq ft, 5 bars (-80dBm) ~7, 500 sq ft)
- Setting up one customer-supplied Radar Detector
- Mounting to rear view mirror or customer-provided dash mount
ChargerCity Super Suction Beltronics and Escort Passport Radar Detectors Bracket Mount w/New and improved metal bracket that prevent shaking during usage.
The sticky suction base uses a powerful combination of polyurethane gel and suction to provide a maximum surface bond it is compatible with the following Radar Detectors
Beltronics and Escort Passport radar detectors. Compatibility: X70, S55 S75, New Passport, STi Magnum, STi Driver, GX65, GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895 & Express 795, Passport 9500ix, Passport 9500i, Passport 8500×50, Passport 8500, Solo S2, Solo S3, Solo RD-5110, Passport 7500S, Passport 7500, 6800, 5000, 4600, 4500, and 4200.
NOT COMPATIBLE WITH MAX, MAX2, MAX360 OR IQ RADAR DETECTORS
If it has a drop in suction, just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction.
- Brand New in ChargerCity NO FUZZ NO MESS Packaging ** Manfuacture Direct Replacement Warranty**
- Polyurethane Gel sticky base Strong adherence to the windshield (Non Permanent, Resuable Suction Base)
- NEW AND IMPROVE PERFECT FIT METAL SLIDE IN CRADLE THAT WILL NOT VIBRATE OR SHAKE DURING DRIVING
- Easy to install with adjustment thumb screw knob to lock radar into position, Superior performance under extreme heat and cold weather *** If notice drop in suction because dust on the base (due to constant install & removal of mount), just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction***
- NOT COMPATIBLE WITH Passport IQ, EX, SmartRadar, MAX, MAX2, MAX360 or any other brand Radar Detector
Installation guide a: monitor get Power 1. Find out the car charger to plug into the monitor firstly, then other side plug into your car cigarette, then monitor will get Power now b: camera get Power 1. Find out two pcs power cable for each camera to connect to your camera 2. Red power to connect to power +, like reversing light’s power + for one of them, so that this camera can work as reversing camera. 3. Second camera to get another power + from other power source like the continues power if you want it work as monitor 4. Connect to headlight or turn light’s power + according what you want this camera working as packing List 1. One wireless monitor 2. Two wireless backup camera 3. The wireless signal antenna 4. 3 pcs hard power cable 5. One car charger 6. One monitor bracket 7. One stick for bracket 8. Fitting kits like screw
- Rv wireless backup Camera 100% no interference, camera Wireless Signal Can stay smooth and clear even car speeds up to 75Mile
- Rear view Camera with advanced wireless technology no signal lost no picture lost as first released wireless set
- IP69 level Waterproof Camera with special 12 IR LED lights design which can offer The best view angel compare with the market models
- Back camera with monitor Kit including all accessories When install: wireless monitor wireless camera installation kits power cable for both camera and monitor car charger screen holder
- Customer Service is our passion: 30-day money-back, 24-month replacement and lifetime support. Customer Service Email: Xroose@163.com