Style: 4 PIN
Image Device: 1/4 Inch Color CMOS
Effective Pixels: 628x586pixles/PAL; 510X496pixels/NTSC
TV System: PAL/NTSC
Minimum Illumination: 0.1Lux / F1.2 (IR ON)
Horizontal Resolutions: 420 TV lines
Video Output: 1.0vp-p 75Ohm
Gamma Consumption: 0.45
Lens angle: 120deg
White Balance: Auto
Lens angle: 3.6mm(92deg)/2.8mm(120deg)
S/N Ratio: More than 48db
Video output: RCA connector, 1.0V p-p 75ohm
Power Supply: DC 12V-24V
Weatherproof/Waterproof, can be used both in car and home.
18 LED light.
LCD: 7 inch TFT LCD Screen
Resolution: 800(W) X 480 (H)
Video System: NTSC/PAL
Power: < / = 3W
Environment Humidity: 10% ~ 90%
Operating temperature: -20 ~ 60 degree Celsius
Storage temperature: -40 ~ 85 degree Celsius
Power Supply: DC +12V-24V
1 x 4pin 18LEDS Night Vision Waterproof Car Rearview Camera
1 x 15m Video Cable
1 x 4pin 7″ TFT LCD HD Monitor
1 x Holder
1 x Remote Control
1 x Convert Cable
1 x Manual
- 2in1: 7″ TFT LCD Monitor + Heavy Duty Night Vision Rear View Camera. Heavy-duty 15M video + power cable with a waterproof aerospace-type connector. It is so reliable that you won’t have a chance that the connection gets loose during driving,It’s very outstanding device for car reverse system For Car/Trucks/ Caravans/ Buses
- 100% waterproof IR camera with 120° wide view angle, 18 IR LED Night Vision Metal heavy Duty car rear view camera, Waterproof camera body with a sun-visor and metal bracket. Easy to mount on any flat surface of the vehicle, it help your view still clearly at night or in bad weather.
- Monitor has 2 Channel Video Input, V1/V2 Selectable,One Way Volume Input. Monitor automatically turns on and switch to rearview camera when reversing. Monitor can be roof mounted or dash mounted to meet your special need.
- 1/3″ CMOS Camera,Outputs digital signals that has Highly Clear,Color Contrast ,Sharpness Picture.Image can be rotated horizontally and vertically for mirror or normal viewing.
- 12V-24V DC power input range to fit most of the medium to large vehicles on the road, Aerospace-type cinch connectors are used for all connections. This is more reliable and simple to install